제품소개

Durability Test

제품사진

CAC & WCAC T-Cycle

  • Thermal cycle test inter cooler(CAC, WCAC) of the wide selection
  • The various safety device is embodied
  • Controls all functions from software
  • Guarantees the test which is stabilized
  • Supports a calibration mode (S/W)
  • Also the order production for the customer is possible
  • Air Flow meter - Venturi Nozzle Type(Test Samp Rear) 6Loop
Feature
  • Test room - Chamber
  • Coolant supply system - Coolant tank, Flowmeter, Pump
  • Refrigerator - Eva. & Cond. System
  • Control - PLC controller( PID, Auto tune )
  • Indicator - Controller, Counter, Timer & Indicator
  • Instrumentation - Sensor & Converter
  • DAS - Field Point & Labview S/W
Specifications
MODEL SEOUL-TCT-CAC(W)-8848-3 Series
System Air compressor, Heat exchanger, Pipe line system,REF & Chiller
Compressed Air 750 kPa
Safety Device Heater E.O.C.R, SCR over current, pressure H.P S/W
High temperature : High limit cut off
Pressure Range 0 ~ 500 kPa
Air Temperature 20 ~ 220℃ ± 5℃
Thermal cycle
Ramp Time
30℃/sec
Ambient Temperature 25℃ ± 5℃
Test Cycle 1,000,000 cycle
Refrigerator Capacity : 30HP × 3 Q'ty, 20HP × 1 Q'ty, 10HP × 1 Q'ty
Hot Air Mass Flow Rate 1 Loop : 600kg/hr (high), 50kg/hr(Low)
Total 6 × Loop
Coolant Mass Flow Rate 1 Loop 0 ~50 Liter/min (at 500 kPa)
Total 6 × Loop
Construction
Material Urethane Panel & Stainless & Aluminum
Sizing 6m(W) * 2.3m(H) * 11m(L)
Insulation : Poly Urethane 100t
Control
Control Manual / Full Automatic
Control Interface LabVIEW SoftWare with PC Interface