Heater Core Rad P-Cycle
- Test the durability and an internal pressure of the radiator & heater core
- The various safety device is embodied
- Controls all functions from software
- Guarantees the test which is stabilized
- Supports a calibration Mode (S/W)
- Also the order production for the customer is possible
Feature
- Test room - Chamber
- Cooling water cooling system - Ref. System, Cold tank
- Cooling water heating system - Heater & Hot tank
- Cooling water supply system - Pump, Valve & Pipe line
- Indicator - Controller, Counter, Timer & Indicator
- DAS - Field Point & Labview S/W
Specifications
| MODEL |
SEOUL-PCT-RH-8848-1 Series |
| System |
Air compressor, Heat exchanger, Pipe line system |
| Compressed Air |
600 kPa |
| Safety Device |
Heater E.O.C.R, SCR over current, Pressure H.P S/W
High temperature : High Limit cut off |
| Inlet Pressure |
50 ~ 150 kPa |
| Temperature |
Hot temperature : 80 ~ 100℃ ±3℃
Cold temperature : -10 ~ 0℃ ±3℃ |
| Coolant Flow Rate |
20~ 100 LPM |
| Ambient Temperature |
25℃ ± 5℃ |
| Test Cycle |
1,000,000 Cycles |
| Refrigerator |
Comp.30HP * 2EA (GAS R-22) / Water cold condending system |
| Pressure Transducer |
0 ~ 500 kPa ±0.75% FS |
| Temperature Sensor |
-50 ~ 150℃(TC T-type, Diameter:1/8" STS sheath) |
Construction
| Material |
Rolled Acrylic & Stainless & Aluminum |
| Sizing |
3500(W) * 2300(H) * 2100(D) |
Control
| Control |
Manual / Full Automatic |
| Control Interface |
LabVIEW SoftWare With PC Interface |
