Heater Core Rad P-Cycle 2
- Test the durability and an internal pressure of the radiator & heater core
- The various safety device is embodied
- Controls all functions from software
- Guarantees the test which is stabilized
- Supports a calibration Mode (S/W)
- Also the order production for the customer is possible
Feature
- Test room - Chamber
- Cooling water cooling system - Ref. System, Cold tank
- Cooling water heating system - Heater & Hot tank
- Cooling water supply system - Pump, Valve & Pipe line
- Indicator - Controller, Counter, Timer & Indicator
- DAS - Field Point & Labview S/W
- Trapezoidal, sine Wave, Square Wave - Cylinder Actuator System
Specifications
MODEL |
SEOUL-PCT-RH-8848-2 Series |
System |
Cylinder Actuator, Heat exchanger, Pipe line system |
Compressed Air |
600 kPa |
Safety Device |
Heater E.O.C.R, SCR over current, Pressure H.P S/W High temperature : High Limit cut off |
Pressure cycle |
1Hz , 50 ~ 500 kPa |
Temperature |
Hot temperature 15~ 130℃ ±3℃ |
Coolant Flow Rate |
Electromagnetic Flowmeter Type 20 ~ 100 LPM |
Ambient Temperature |
20 ~ 30℃ ± 5℃ |
Test Cycle |
1,000,000 Cycles |
Refrigerator |
Water cold condending system |
Pressure Transducer |
0 ~ 500 kPa ±0.75% FS |
Temperature Sensor |
-50 ~ 150℃(TC T-type, Diameter:1/8" STS sheath) |
Construction
Material |
Rolled Acrylic & Stainless & Aluminum |
Sizing |
3500(W) * 2300(H) * 2100(D) |
Control
Control |
Manual / Full Automatic |
Control Interface |
LabVIEW SoftWare With PC Interface |