Durability Test
Corrosion Tester (CCT & SWAAT)
- Sea Water Acetic Acid Test (Complex Corrosion Test)
- Salt spray,Hot air dry,Wetting,Open air drying,Condensation
- Temperature,Humidity,Inter corrosion
- Guarantees the test which is stabilized
- Supports a calibration Mode (S/W)
- Also the order production for the customer is possible
- Resistant to corrosiveness(Electrolytic Polishing) SUS316L
Feature
- Test room - Chamber
- Chamber & Piping Material - Sus316L ,Resistant to corrosiveness
- Corrosion heating system - Heater (Wet) & Refrigeration system
- Pressure Control system - Spray,Mixing
- Indicator - Controller, Counter, Timer & Indicator
- Instrumentation - Sensor & Converter
- DAS - Compact Rio & Labview S/W
- Circulation Cycle test - Flow control
Specifications
| MODEL | SEOUL-CCT-8848Series |
|---|---|
| System | Cooling module & Radiator,Heater core |
| Soure Air Pressure | 500 ~ 600 kPa (clean air filter) |
| Safety Device | Heater E.O.C.R, SCR over current, Pressure H.P S/W High temperature : High Limit cut off |
| Supply Pressure | 70~180 kPa |
| Temperature & Humidity Control | Temperature : 20~70℃ ±1℃ Humidity : 30~99.9 %RH (Not controlled below 0 ℃) |
| Flow Rate | Flow meter Magnetic Type 20LPM(1200LPH) |
| Chamber Temperature | -20~70℃ ± 1℃ |
| Inter corrosion | Circulation Pump 0~5 LPM (at Temp.10~90℃) |
| Refrigerator | Water cold condending system |
| Pressure Transducer | 0 ~ 500 kPa (±)0.75% FS |
| Temperature Sensor | -50 ~ 150℃, RTD PT100 |
Construction
| Material | STS316L ,Resistant to corrosiveness(Insulation Ceramic wool) |
|---|---|
| Sizing | Exterior 2200(W) * 2100(H) * 2000(D) Test Room 1200(W) *1000(H) * 1000(D) |
Control
| Control | Manual / Full Automatic |
|---|---|
| Control Interface | LabVIEW SoftWare With PC Interface |